歡迎訪問山東漢興機械設備有限公司官網!
全國銷售服務熱線:15588713499
產品分類導航: 手扶激光整平機 四輪激光整平機 六輪激光整平機 手扶抹光機 座駕抹光機 框架式振動梁 切割機 電動斗車 電動板車
當前位置: 主頁 > 激光整平機資訊 > 行業動態
激光整平機維護方法分享
漢興機械 / 發布時間:2017-12-20

激光整平機可采用草袋覆蓋, 灑水養護, 也可采用塑料薄膜封閉保水養護。但必須全部封閉, 不允許有裸露部位, 當塑料布破裂時要及時修補。
 
Laser leveling machine can be used to sack cover, water conservation, also can use plastic film sealed and water conservation. But it must be completely closed and no bare parts are allowed to be repaired in time when the plastic cloth is broken.
 
后期養護可采用灑水養護, 早、午、晚各灑一次水, 養護期內禁止一切車輛行駛。激光整平機切縫,為防止因切縫不及時產生橫向斷板, 可采用軟切縫機早期切縫, 軟切縫時間控制在矽表面踩不出腳印時即可切縫。
 
The later maintenance can be sprinkled with water, early, noon and evening, each water is sprinkled, and all vehicles are prohibited during the maintenance period. The slicing of laser leveling machine can prevent transverse cutting of plate due to slit failure. Soft slicing machine can be used for early slitting and soft slit time control.

激光整平機

激光整平機
當鹼的凝固期達到一定溫度時,要用硬切縫機二次擴縫, 使切縫的寬度、深度達到設計要求。質量控制要點精心支模, 認真檢驗模板的各部位質量, 使鹼路面各項質量指標控制在允許誤差內。
 
When the solidification period of alkali reaches a certain temperature, it is necessary to expand the seam with a hard slit machine two times so that the width and depth of the slit will reach the design requirements. The quality control points are carefully checked, and the quality of each part of the template is carefully checked, so that the quality indexes of the alkali pavement are controlled within the allowable error.
 
加強激光整平機硅的拌合管理與出場檢驗, 使鹼配合比劑量準確、拌合均勻、和易性好、質量穩定。
 
The mixing management and field inspection of silicon in the laser leveling machine are strengthened, so that the dosage of alkali mixture ratio is accurate, the mixing is uniform, the quality is good, and the quality is stable.